Only complaint I have is the black color for the face of the shield came out as more of a dark gray. Other than that great quality
1st Due Leather Firefighter Helmet Shield
The 1st Due Leather Firefighter Helmet Shield is a bordered custom front for traditional firefighter helmets. Its defining choices are the single- or double-border treatment and the option to use a textured or smooth leather face. The 1st Due name identifies this shield design; it does not refer to the Phenix First Due helmet.
Use the live preview to enter the available department, company, rank, name, number, or radio identification. Select the offered lettering, colors, and layout details, then review the complete arrangement before placing the order.
The single-border option keeps the outside treatment restrained while still framing the shield. The double-border option adds another line of separation around the design for a more defined border treatment. Both options use the same 1st Due layout and personalization choices.
The border selection changes the frame, not the underlying 1st Due identity.
Choose a textured main body for a tooled surface or select smooth to keep the leather face flatter and place more emphasis on the lettering and borders. Each shield is handmade from full-grain leather.
The 1st Due is available in multiple height and width combinations for traditional helmet setups. Measure the helmet and shield holder before selecting a size. Do not choose by helmet name alone when mounting-post spacing or holder dimensions can vary.
The shield ships unpunched so the mounting holes can be positioned for the customer’s helmet hardware. Review the sizing and mounting guides shown on the page before altering the finished shield.
Choose this product when you want the bordered 1st Due shield design in one of the available dimensions. If you need the compact layout made specifically for the Phenix First Due helmet, use the Phenix First Due Custom Firefighter Helmet Shield. The two shield designs have different layouts and fit requirements.
Still comparing layouts? Use our helmet shield styles and buying guide to compare text fields, artwork, beveling, and complete-shield prices.
Choose height first. Measure from the brim where the shield’s bottom sits to the top notch where the shield seats in the holder, not the top of the eagle or ornament. Choose the closest available height at or slightly below that measurement. Round down slightly between sizes.
Example: 6.3″ of available height → a 6.25″-tall shield. A 6.5″-tall shield is too tall.
Then make a quick width check. Width usually falls in line once height is chosen. Measure outside-to-outside across the mounting studs or screws and add ¾–1″ total for the minimum recommended shield width. Add this once, not to each side. You can choose a wider look.
Phenix TL-2: Usually needs 6.25″ or 6.5″ of width. Choose the correct height first.
Sizes are listed height × width. Check this design’s available options. See our fire helmet shield measuring guide for photos and the helmet reference chart.
We do not punch mounting holes. Use our shield mounting guide to position and punch them for your helmet’s hardware.
These options are not offered on every shield. When available on a design, the explanations below show what each option changes in the finished shield.
Mounting your fire helmet shield is simple when you line it up correctly and drill or punch the holes the right way. Start by matching the shield to your helmet’s holder, check alignment, and mark your hole positions before drilling or punching. Once the hardware is secured, tighten everything evenly and break it in so it sits clean and square.
For full step-by-step instructions, see our guide:
How to Mount Your Fire Helmet Shield
Save on custom helmet shields with quantity pricing.
Discounts apply automatically in your cart. See the deals and discounts page for current offers and details.