To choose the right fire helmet shield size, measure your helmet in two spots:

• Shield Height – Measure from the helmet brim up to the top notch on your shield holder.
• Shield Width – Measure from outside-to-outside of the mounting posts or screws.

These two measurements tell you exactly which custom fire helmet shield size fits your lid.

Want the full breakdown with photos, sizing charts, and examples for different helmet brands?

Check out our guide:

Choosing the right size fire helmet shield

These options are not offered on every shield. When available on a design, the explanations below show what each option changes in the finished shield.

Textured

• A tooled texture applied to the face of the leather. It adds visual bite and gives the shield a more aggressive, high-contrast look.

Smooth

• No surface texture added. The leather face remains flat and clean, giving the shield a sharper, more traditional appearance with full focus on layout and lettering.

Beveling/Tooling

• Hand-carved and stamped tooling with beveled detail around borders, numbers, or design elements. Adds depth and definition to the leather.
• Learn more about beveling / tooling here

Mounting your fire helmet shield is simple when you line it up correctly and drill or punch the holes the right way. Start by matching the shield to your helmet’s holder, check alignment, and mark your hole positions before drilling or punching. Once the hardware is secured, tighten everything evenly and break it in so it sits clean and square.

For full step-by-step instructions, see our guide:

How to Mount Your Fire Helmet Shield

Firefighters looking for the best way to save on custom fire helmet shields and custom radio straps. Can take advantage of several automatic combo and bulk discounts.

Available Deals

Shield and Radio Strap Combo – 15 percent off
Pair a custom helmet front with one of our custom leather radio straps and get
15 percent off the pair. The discount applies per set, and you can order
multiple sets if needed.

Bulk Shield Pricing
If you’re ordering several shields. You’ll automatically get discounted pricing
based on quantity.

• 6–11 shields: 5 percent off
• 12–23 shields: 10 percent off
• 24 or more shields: 15 percent off

Discounts apply automatically in cart.

These deals make it easier to upgrade your fire helmet shield, customize your gear, and save at the same time.

Smoke Eater Leather Firefighter Helmet Shield

The Smoke Eater Leather Firefighter Helmet Shield was built for the fireman who lives for the push. The ones forcing doors, stretching line, taking the hallway, and making the fire floor no matter how ugly the job gets. This custom leather firefighter helmet shield brings aggressive fireground attitude together with deep dimensional craftsmanship built to stand out on any traditional fire helmet.

Designed with sharp flowing lines, layered bevel work, and a hard hitting profile, the Smoke Eater delivers a completely different look than the average flat leather front. Every angle, cut, and contour was built to create depth, shadow, and aggressive visual movement that commands attention under fireground lighting.

This custom firefighter helmet shield features a raised center number layout, dimensional top and bottom banners, and aggressive side detailing inspired by old school firehouse culture and traditional leather helmet fronts. The result is a premium leather fire helmet shield that looks right at home riding the front brim of a well worn N5A or traditional style fire helmet.

The Smoke Eater was designed for firefighters who still believe in getting inside, going to work, and getting the knockdown. No soft lines. No generic shapes. No parade front energy. Just a bold custom leather firefighter shield built with aggressive styling and heavy firehouse attitude.

Every Smoke Eater Leather Firefighter Helmet Shield is handcrafted from premium leather and fully customized with your department, company, station, rank, assignment, or custom text. Whether you are building a front for your daily helmet setup, retirement lid, truck company shield, engine company front, or custom firefighter gift, the Smoke Eater was built to leave an impression.

Features

• Custom leather firefighter helmet shield
• Aggressive Smoke Eater shield profile
• Deep layered bevel detailing
• Raised center number design
• Dimensional custom banner layout
• Premium leather construction
• Fully customizable text and numbering
• Traditional firefighter helmet shield styling
• Handmade leather helmet front
• Built for traditional style fire helmets

Perfect For

• Engine company firefighters
• Truck company firefighters
• Interior attack firefighters
• Busy firehouses
• Custom traditional helmet setups
• Retirement helmet shields
• Fire department gifts
• Firefighters who live for the work

The Smoke Eater is not a stock firefighter helmet shield.

It was built for the smoke eaters, nozzlemen, truckies, and firemen who get the job done no matter what stands in the way.