Turn out great!!
The Passport Firefighter Helmet Shield pairs a custom leather helmet front with a removable, screw-mounted insert. Choose a simple numbers layout or a Script insert with stylized lettering, clipart, and a number, then select the text layout for the main shield.
Every option on this page includes the main leather shield and one customized insert.
Choose your shield size and a textured or smooth main shield. Review the wording, colors, and layout in the customization preview before ordering.
The insert attaches to the main shield with screws, allowing it to be replaced without ordering another complete shield. Already own an LRC Passport shield? See the Passport Firefighter Helmet Shield Insert for an insert-only order.
Our replacement inserts are designed specifically for Little River Customs Passport shields, not shields made by other brands.
Choose the complete shield size to suit your helmet. See our helmet shield styles and buying guide for help comparing options. The shield ships unpunched; you will need to punch or drill through the insert for helmet mounting. The insert screws and helmet mounting hardware serve different purposes. Check and tighten the insert screws regularly.
Choose Passport when you want a removable identification insert. For a fixed shield with five customizable text zones, compare The Plug Leather Firefighter Helmet Shield.
Choose height first. Measure from the brim where the shield’s bottom sits to the top notch where the shield seats in the holder, not the top of the eagle or ornament. Choose the closest available height at or slightly below that measurement. Round down slightly between sizes.
Example: 6.3″ of available height → a 6.25″-tall shield. A 6.5″-tall shield is too tall.
Then make a quick width check. Width usually falls in line once height is chosen. Measure outside-to-outside across the mounting studs or screws and add ¾–1″ total for the minimum recommended shield width. Add this once, not to each side. You can choose a wider look.
Phenix TL-2: Usually needs 6.25″ or 6.5″ of width. Choose the correct height first.
Sizes are listed height × width. Check this design’s available options. See our fire helmet shield measuring guide for photos and the helmet reference chart.
We do not punch mounting holes. Use our shield mounting guide to position and punch them for your helmet’s hardware.
These options are not offered on every shield. When available on a design, the explanations below show what each option changes in the finished shield.
Mounting your fire helmet shield is simple when you line it up correctly and drill or punch the holes the right way. Start by matching the shield to your helmet’s holder, check alignment, and mark your hole positions before drilling or punching. Once the hardware is secured, tighten everything evenly and break it in so it sits clean and square.
For full step-by-step instructions, see our guide:
How to Mount Your Fire Helmet Shield
Save on custom helmet shields with quantity pricing.
Discounts apply automatically in your cart. See the deals and discounts page for current offers and details.